[SOLVED] Power data wrong, something filters it out

[MathijsHofkens]

Hi there

Quite new to intervals.icu. I’m using strava to integrate with intervals.icu and when I’m looking at my power data, some weird things are happening.

For example, I did an effort on the bike which was 508 watt for 1 minute. Intervals.icu adds a power spike warning of 10%, but the data is still off. Can I remove the power spike somewhere?

[Nik_Om_Cinderella_Ri]

Did you try xclicking on the error?
“It’s OFF cos it’s been fixed” or removed.

[R2Tom]

@MathijsHofkens

Can I remove the power spike somewhere

You can change this in the (FTP) settings. If you don’t find it right away, please search the forum, this should be mentioned multiple times.

[Nehonimo]

Hi,
I’m quite new as well.
I’ve found this:
Power spike fixing issue? - Intervals.icu Forum

And there was a document, where was descirbed to add a Datafield for RAW Data to check the uncut data. But unfortunately I dont find the document and the data field again.
I did set the powerspike value up from 30 to 50%.
Unfortunatly I do not remember, if it was necessary to reanalyse the activity.

Found this actually: A way to turn off fixing power spikes - Feature Requests - Intervals.icu Forum

HTH a bit.

[MedTechCD]

Power reading discrepancies

Settings - Ride tab - Power settings [image] Make sure that your FTP is not too underestimated and raise the Power Spikes value. If your Power meter has no spikes, you can set it way up, even 999%. The way it works is explained when you click on the pencil icon: [image]

[MathijsHofkens]

Thanks a lot, this worked!