Max Power Too Low?

1

I’ve uploaded a ride today, in intervals.icu I see a max power and max 1s power of 728, however when I look on other plaforms, and within the FIT file itself I’m seeing 856 (Xert), 861 (Fit file to CSV convered) and 874 (Garmin connect). So 3 resources show around 860 watts, but intervals is 728 watts which seems to be a big difference.

Can anyone help me understand this?

2

You probably need to raise the Spike Detection setting on the Settings page. Ride-power Settings.
Default is 30 % and too low for some. Try something like 80 too avoid clipping.

1 Like
3

Is that the Power Spikes setting?

Mine was 19, I upped to 80 and reimported the file, but it still is blocking the few seconds … correction, I had to also correct it within the activity, not it is looking good.

Thanks!!!

4

Re-analyze should do. Bottom of Activity page, Actions.
You can check for power clipping when zooming the chart and comparing with RAW Power chart.

5

Yes, once you brought my attention to it, there was a red dot on the power chart, when zoomed in there was a sectino of red lined zero power.

Thanks again!!