Garmin-intervals-bridge – your complete Garmin FIT files and wellness data in Intervals.icu, with or without the official Garmin integration (now also with Garmin’s Personal API)

0.10.1 is out – the bridge as a Home Assistant app (thanks @DarKen for asking – and for testing).

If Home Assistant runs at your place anyway, it’s now the easiest home for the bridge:

  1. Add the repository – one click, or by hand: Settings → Apps → App store → ⋮ → Repositories, https://github.com/futureweb/garmin-intervals-bridge
  2. Install Garmin Intervals Bridge and fill in the form: API key, mode, Write to Intervals (off = a dry run first), swap, training advice, alerts …
  3. Sign in to Garmin (MFA included) on the bridge’s web page – right in the Home Assistant sidebar.

No terminal, no extra password: Home Assistant signs you in, and nothing but Home Assistant can reach the page. The time zone comes from Home Assistant, and updates show up like any other app update. Moving over from a NAS or another computer? Copy the bridge’s data folder to Home Assistant’s share/garmin-bridge and the app takes it over on its first start – Garmin session and archive included, no new sign-in.

It’s brand new, so reports from real Home Assistant installs are very welcome. Guide: docs/HOME_ASSISTANT.md · Notes: release 0.10.1

@Andreas_Schnederle-W Thanks for the explanation and the quick fix! Just installed 0.10.0 and also set the BRIDGE_POLL_SECONDS variable in .env to 300. Garmin requests value on the status page is now very zen to look at haha.

1 Like

Can I clone the git repo instead of using pip --break-system-packages?

Yes – but you don’t need either: --break-system-packages is never necessary. Give the bridge its own environment, which is what that pip message is asking for:

python3 -m venv ~/GarminBridge/venv
~/GarminBridge/venv/bin/pip install garmin-intervals-bridge
~/GarminBridge/venv/bin/garmin-intervals-bridge setup

(On Debian/Ubuntu you may need sudo apt install python3-venv first.) Or with pipx: pipx install garmin-intervals-bridge, after which garmin-intervals-bridge works from anywhere. The autostart that setup sets up uses exactly that environment, and updating is ~/GarminBridge/venv/bin/pip install -U garmin-intervals-bridge (or pipx upgrade garmin-intervals-bridge).

Cloning works the same way if you’d rather run from the source: git clone https://github.com/futureweb/garmin-intervals-bridge, then in that folder python3 -m venv .venv && .venv/bin/pip install ..

1 Like

I know, I just think it’s easier to clone everything to its own subdirectory with git clone [url]

Fair enough – that works nicely too:

git clone https://github.com/futureweb/garmin-intervals-bridge
cd garmin-intervals-bridge
git checkout v0.10.2        # a release; main can carry changes not released yet
python3 -m venv .venv
.venv/bin/pip install -e .
.venv/bin/garmin-intervals-bridge setup

With -e the environment runs straight from your clone, so updating is git fetch --tags && git checkout <new tag> (run the pip install -e . line again only when a release adds a dependency), then .venv/bin/garmin-intervals-bridge autostart to restart the background bridge. Settings and data stay in ~/GarminBridge, outside the clone.

1 Like

I actually had to use the pipx method, because debian bookworm only ships with python 3.11. That’s debian for you. But both ways work :slight_smile:

1 Like

I have a few questions to make sure I understand how it works.

I tested garmin-intervals-bridge for a few days on my MacBook and then installed it on a Raspberry Pi Zero 1 (Raspberry Pi OS Trixie) via uv (uv tool install garmin-intervals-bridge). All packages were available as prebuilt wheels for armv6, which is great.

The first manual run (garmin-intervals-bridge sync, right after garmin-intervals-bridge setup, auto-start: no) took several minutes. RAM was not an issue, but the CPU was fully loaded. I’m not sure what needs that much CPU. CRC checks, maybe? Perhaps this could be investigated and optimized, for example with an optional faster mode that skips some checks at the user’s own risk. Admittedly, the Pi Zero 1 is at the very low end of CPU performance.

I’d like to configure everything manually via systemd and not use any of the automation built into garmin-intervals-bridge. Are the following commands all I need?

  • garmin-intervals-bridge sync --apply in the morning, to pick up wellness/sleep data after the watch has synced, and any workouts that were missed (lookback window: today and the past three days?)
  • garmin-intervals-bridge watch --apply after a workout has been synced to Garmin Connect and transferred to Intervals.icu via the native integration

All configuration is done in the .env file?

Hi Michael, good questions – and nice to hear it runs on a Pi Zero 1 at all!

CPU: that’s decoding the FIT files. The bridge uses Garmin’s official FIT SDK, which is pure Python, and for every activity it reads two files: Garmin’s original and the copy Intervals holds, to see what Garmin filtered out. The first run does that for every activity of the last four days, plus the wellness files – hence the minutes on a Pi Zero. After that it’s only each new activity, once.

You were on the right track with the CRC, though not as something to skip. I measured: the bridge checks each file’s CRC three times, which is redundant, not extra safety. The next release checks it once. That takes about 40 % off the CPU time per activity without skipping anything. I’d rather keep the check itself – it’s what stops the bridge from writing values out of a damaged download.

systemd by hand: yes, that’s a supported way. The repo has ready-made units in deploy/systemd, described in deploy/README.md. What you need:

  • garmin-intervals-bridge watch --apply on a timer, every 5-xx minutes. No need to time it after a workout: a watch that finds nothing costs one tiny Intervals request and no Garmin request at all. It also picks up last night’s wellness once your watch has synced, so you don’t need a separate morning job.
  • garmin-intervals-bridge sync --scope all --mode enrich --activity-days 4 --activity-interval 120 --apply every 30 minutes. This is the safety net: an import that came in late, failed downloads that are due for a retry, and the wellness of the last days, including the day’s final read. With --activity-interval 120 it reads Garmin’s activity list only every two hours, and a run with nothing to do makes no Garmin request.
  • Optional: health once a day (it reports problems, and alerts you if you set alerts up) and snapshot-account once a month.

The lookbacks are 4 days for activities (BRIDGE_ACTIVITY_LOOKBACK_DAYS) and 3 days for wellness (BRIDGE_WELLNESS_LOOKBACK_DAYS). Use either these timers or run/autostart, not both.

Configuration: yes, everything goes in the settings file. The bridge reads BRIDGE_ENV_FILE if it’s set, else ./.env in the working directory, else ~/GarminBridge/.env (the one setup wrote). So in your units, either set Environment=BRIDGE_ENV_FILE=/home/<you>/GarminBridge/.env or run them as your own user. Variables set in a unit win over the file, and a relative data folder counts from the file’s folder.

The shipped units assume a service user and /var/lib/garmin-intervals-bridge. For a home-folder install, change:

  • User=
  • the ExecStart path to your uv-installed binary
  • ProtectHome=yes to ProtectHome=read-only, plus ReadWritePaths=/home/<you>/GarminBridge
  • and drop MemoryMax=512M on a 512 MB Pi.

Coming in the next release, and a good fit for a low-power box:

  • the watch decides by itself when a look is due, so its timer can tick every minute
  • a slower pace for quiet hours instead of none at all
  • an adaptive mode (beta) that looks often only around the hours you usually finish an activity

0.11.0: fewer requests for Intervals.icu – and a second review of the whole code

David asked self-hosted tools not to poll every minute, so this release is about asking Intervals less often without making you wait:

  • Adaptive polling (beta) – BRIDGE_POLL_MODE=adaptive (Home Assistant: Adaptive polling; web page: Settings). The idea is to keep the load on Intervals’ API as low as possible. The bridge learns from your own archive when your activities usually end and checks at your normal pace only around those times. At times you usually don’t upload, it throttles down to every 30 minutes, and for an hour after a new activity it’s fast again. It never checks faster than your configured interval and never outside your poll hours. On my account that’s about 390 checks a day instead of 1,440.
    It’s still beta – if you try it, I’d love to hear whether your activities still came in quickly, and what it learned for you (it’s in the log and on the status page).
  • Quiet hours with a slower pace – BRIDGE_POLL_QUIET_SECONDS: outside BRIDGE_POLL_HOURS the bridge checks this often instead of not at all.
  • Check now – a button on the web page’s status page.
  • About 40 % less CPU per activity – the FIT file’s CRC is now checked once instead of three times (thanks @Michael.0000, this one is for the Raspberry Pi).

I also had the whole code base reviewed a second time, by an independent AI code review (OpenAI Codex - GPT-6 Astra (XHigh)). I checked every finding against the code and reproduced it, then fixed all of them – about 30. Most were rare failure paths that could have cost data, mainly in swap mode and the wellness archive. None is known to have happened, but they’re closed now. The details are in the CHANGELOG.

To upgrade: Home Assistant shows the update, Docker users pull the new image, pip users run pip install --upgrade garmin-intervals-bridge.

2 Likes

I’ve installed it. Thanks for all your hard work! Its working… enrich etc. work but when I run the ui
a webpage opens automatically in firefox http://127.0.0.1:8766/. (the default port is being used by anki) and then I click “Check Now” and a new tab opens saying “foreign form”

What have I done wrong?

1 Like

A big thanks from me aswell

I have the same issue as Samantha_Lane. Whatever I try to change on the webpage, I get the same message “foreign form”.

In Power Shell it writes:

"File “, line 325, in decode
UnicodeDecodeError: ‘utf-8’ codec can’t decode byte 0x84 in position 93: invalid start byteException in thread Thread-22 (_readerthread): Traceback (most recent call last)” …

Browser in my case is also Firefox. I turned off all extensions but they might still interfere here. Is there a way to open the web page with a non-default browser (clean profile, other browser like brave)?

Thanks again!

@Samantha_Lane @No_Cheetah thank you both – and sorry, that one’s on me. It’s a bug that only shows in Firefox: the web page asked the browser not to send a referrer, and with that setting Firefox – correctly, by the web standard – sends a form’s origin as “null”. The page’s safety check took that for a foreign website. Chrome and Edge don’t do that, and in Home Assistant that check isn’t used, so it slipped through.

It’s fixed in 0.11.1, which goes out today. Update with pip install --upgrade garmin-intervals-bridge (on Windows py -m pip install --upgrade garmin-intervals-bridge; with uv or pipx their upgrade command), then start the page again with garmin-intervals-bridge ui. If the bridge runs in the background, garmin-intervals-bridge autostart restarts it with the new version.

@No_Cheetah the UnicodeDecodeError in PowerShell is a second, harmless bug from the same corner. On a German Windows, the page’s “starts at login” check gets its answer in the console’s code page, and the page read it as UTF-8. That’s fixed in 0.11.1 too.

And for the record: garmin-intervals-bridge ui --no-browser prints the link instead of opening it, so you can paste it into any browser you like.

1 Like

Many thanks again!

Have just updated to 0.11.1 and the web page works now just fine in firefox :+1:

Great, that’s handy

1 Like

Thank you!

Although I’ve made a shortcut on my mac and can run the watch --apply script with a hot key combination and I think that’s how I’ll use it. I don’t mind having to manually trigger the bridge after each workout.

And I’ve discovered all the interesting graphs you’ve made too!
My watch is a bit basic but I’ve put all the ones that show something on my fitness page.

Thank you!

1 Like

@No_Cheetah great – thanks for confirming!

@Samantha_Lane whatever fits your needs :wink: – a hotkey for watch --apply works just fine. One small thing: watch also brings last night’s wellness once your watch has synced, so a press in the morning gets you that too.

And glad you found the charts! If you’d rather not add them one by one: the web page’s Actions → Charts (or garmin-intervals-bridge setup-charts --apply) puts the whole prepared set on your Fitness page in one go. They stay private to you, and charts you already have are only completed.

Installed today, had two small problems:

-couldn’t find the way to run gmail notification, had problem figuring out app password (but managed to install phone notification instead)

-had two activities from last two days to update and one was updated correctly and another one was updated but there was blank copy of it added too (I just deleted it)

overall amazing app :wink:

ps. one question, so if I understand it correctly, each time I restart my computer I have to go to my terminal nad lunch this app or it will launch with the system?

2 Likes

@Lukasz_Pludowski thanks, and welcome!

Gmail: an app password only exists once 2-Step Verification is on in your Google account. Then https://myaccount.google.com/apppasswords → give it a name (e.g. “bridge”) → Google shows a 16-character password once → paste that into setup or the web page’s Settings. Push messages do the same job, though, so you’re fine either way.

The extra copy: the bridge only ever creates an activity in upload or swap mode – in enrich mode (the default) it only adds values to the copy that’s already there. Could you tell me which mode you chose in setup, and paste the log lines for that activity? On the web page that’s Log; otherwise bridge.log in your GarminBridge folder – look for lines with its date or “Swap”. In swap mode the bridge uploads your original and then deletes Garmin’s copy. If it kept both, the log says why. Another common cause of a duplicate is a second import, e.g. Strava connected to Intervals as well.

After a restart: if you said yes to starting in the background at the end of setup, it starts by itself every time you log in – no terminal needed. garmin-intervals-bridge autostart --status tells you whether it’s set up (on Windows py -m garmin_intervals_bridge autostart --status); the web page’s status shows it too (“Starts at login”). If it isn’t, garmin-intervals-bridge autostart sets it up once.

ad Gmail yeah I got to the point but had problem when pasting the password, but I will just leave it like that for now, I really don’t need mail notifications :wink:

ad Extra copy

I can paste my log from that (it was the earlier version of your bridge from todays morning, I updated after that) so where it says 2 found 1 enriched (at least I think so) it enriched two activities and created one broken copy of that one enriched, where broken meaning no data at all. I deleted it so my bad, could help more.

2026-10-14 10:19:48,171 INFO garmin-intervals-bridge 0.11.0 running (enrich mode): polls every 5 min; full run every 30 min, writing to Intervals
2026-10-14 10:19:48,172 INFO Day boundary: Europe/Warsaw (BRIDGE_TIMEZONE)
2026-10-14 10:20:14,720 INFO Final read of 2026-10-12 (device synced after the day)
2026-10-14 10:20:16,785 INFO Wellness 2026-10-12 new fields: BodyBatteryMax, GarminActiveCalories, GarminAcuteLoad, GarminBodyBatteryCharged, GarminBodyBatteryDrained, GarminEnduranceScore, GarminFitnessAge, GarminHRV5MinHigh, GarminHRV7DayAvg, GarminHRVBaselineHigh, GarminHRVBaselineLow, GarminHillEndurance, GarminHillScore, GarminHillStrength, GarminIntensityModerateMinutes, GarminIntensityVigorousMinutes, GarminKcalBalance, GarminPredicted10KSeconds, GarminPredicted5KSeconds, GarminPredictedHalfSeconds, GarminPredictedMarathonSeconds, GarminRecoveryTimeHours, GarminRecoveryTimeMinutes, GarminSleepAwakeMinutes, GarminSleepBodyBatteryChange, GarminSleepDeepMinutes, GarminSleepLightMinutes, GarminSleepREMMinutes, GarminSleepRespirationAvg, GarminSleepRespirationHighest, GarminSleepRespirationLowest, GarminSleepStressAvg, GarminStressAvg, GarminSweatLossLitres, GarminTotalCalories, GarminTrainingReadiness, avgSleepingHR, floorsClimbed, kcalConsumed, readiness, respiration, steps
2026-10-14 10:20:43,481 INFO Final read of 2026-10-13 (device synced after the day)
2026-10-14 10:20:45,978 INFO Wellness 2026-10-13 new fields: BodyBatteryMax, GarminActiveCalories, GarminAcuteLoad, GarminBodyBatteryCharged, GarminBodyBatteryDrained, GarminEnduranceScore, GarminFitnessAge, GarminHRV5MinHigh, GarminHRV7DayAvg, GarminHRVBaselineHigh, GarminHRVBaselineLow, GarminHillEndurance, GarminHillScore, GarminHillStrength, GarminIntensityModerateMinutes, GarminIntensityVigorousMinutes, GarminKcalBalance, GarminPredicted10KSeconds, GarminPredicted5KSeconds, GarminPredictedHalfSeconds, GarminPredictedMarathonSeconds, GarminRecoveryTimeHours, GarminRecoveryTimeMinutes, GarminSleepAwakeMinutes, GarminSleepBodyBatteryChange, GarminSleepDeepMinutes, GarminSleepLightMinutes, GarminSleepREMMinutes, GarminSleepRespirationAvg, GarminSleepRespirationHighest, GarminSleepRespirationLowest, GarminSleepStressAvg, GarminStressAvg, GarminSweatLossLitres, GarminTotalCalories, GarminTrainingReadiness, GarminVO2MaxCycling, avgSleepingHR, floorsClimbed, kcalConsumed, readiness, respiration, steps
2026-10-14 10:20:46,230 INFO Full run: 0 activities seen, 0 enriched; wellness 2 days checked, 2 written; 65 Garmin requests
2026-10-14 10:20:47,441 INFO Swap: i196826985 stays Garmin's copy: its intervals were edited by hand
2026-10-14 10:20:55,066 INFO Watch: ENRICHED 24709271664 -> i196826985 fields ['PerformanceCondition', 'RecoveryTime', 'TrainingEffectSelect', 'VO2MaxGarmin'] streams []
2026-10-14 10:21:00,133 INFO Swapped 24700926436: Garmin's copy i196580848 -> the original i197103000 (carried [])
2026-10-14 10:21:00,136 INFO Poll: 2 new, 1 enriched, 0 planned
2026-10-14 10:25:01,331 WARNING last 24 h: 2 runs, 1 activities enriched, 2 wellness days written, 66 Garmin requests
2026-10-14 10:25:01,334 INFO Health: last 24 h - 2 runs, 1 activities enriched, 2 wellness days written, 66 Garmin requests
2026-10-14 10:49:22,859 WARNING Retrying (_CappedRetry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='intervals.icu', port=443): Read timed out. (read timeout=75)")': /api/v1/athlete/0/activities?oldest=2026-10-12&newest=2026-10-15&fields=id%2Cexternal_id%2Csource%2Cstart_date&limit=50
2026-10-14 10:49:48,351 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 11:03:15,740 INFO Morning values of 2026-10-14 read (with readiness)
2026-10-14 11:03:15,793 INFO Wellness 2026-10-14 new fields: GarminAcuteLoad, GarminEnduranceScore, GarminFitnessAge, GarminHRV5MinHigh, GarminHRV7DayAvg, GarminHRVBaselineHigh, GarminHRVBaselineLow, GarminHillEndurance, GarminHillScore, GarminHillStrength, GarminPredicted10KSeconds, GarminPredicted5KSeconds, GarminPredictedHalfSeconds, GarminPredictedMarathonSeconds, GarminRecoveryTimeHours, GarminRecoveryTimeMinutes, GarminSleepAwakeMinutes, GarminSleepBodyBatteryChange, GarminSleepDeepMinutes, GarminSleepLightMinutes, GarminSleepREMMinutes, GarminSleepRespirationAvg, GarminSleepRespirationHighest, GarminSleepRespirationLowest, GarminSleepStressAvg, GarminTrainingReadiness, avgSleepingHR, readiness, respiration
2026-10-14 11:03:16,206 INFO ImReady4 advice for 2026-10-14: Planned (Normal – go on, train as planned; HRV z +2.18, resting HR z -1.20)
2026-10-14 11:03:16,404 INFO HRV trend advice for 2026-10-14: Planned (within the normal range: train as planned; written)
2026-10-14 11:19:48,412 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 11:49:48,616 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 12:19:50,903 INFO Swap: i196165681 stays Garmin's copy: imported more than 48 h ago (swap it by hand: `swap <id> --apply`)
2026-10-14 12:20:05,560 INFO Archived summary and extras of 24688352290
2026-10-14 12:20:12,708 INFO Archived summary and extras of 24700926436
2026-10-14 12:20:12,766 INFO Swap: i196826985 stays Garmin's copy: its intervals were edited by hand
2026-10-14 12:20:12,853 INFO Full run: 3 activities seen, 0 enriched; wellness 0 days checked, 0 written; 14 Garmin requests
2026-10-14 12:49:48,730 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 13:19:48,818 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 13:49:48,904 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 14:19:49,208 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 14:58:13,918 WARNING Retrying (_CappedRetry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='intervals.icu', port=443): Read timed out. (read timeout=75)")': /api/v1/athlete/0/activities?oldest=2026-10-10&newest=2026-10-15&fields=id%2Cexternal_id%2Csource%2Cstart_date%2Cmoving_time%2Celapsed_time
2026-10-14 14:58:14,166 INFO Swap: i196165681 stays Garmin's copy: imported more than 48 h ago (swap it by hand: `swap <id> --apply`)
2026-10-14 14:58:14,243 INFO Swap: i196826985 stays Garmin's copy: its intervals were edited by hand
2026-10-14 14:58:14,298 INFO Full run: 3 activities seen, 0 enriched; wellness 0 days checked, 0 written; 3 Garmin requests
2026-10-14 15:19:41,887 WARNING Retrying (_CappedRetry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='intervals.icu', port=443): Read timed out. (read timeout=75)")': /api/v1/athlete/0/activities?oldest=2026-10-12&newest=2026-10-15&fields=id%2Cexternal_id%2Csource%2Cstart_date&limit=50
2026-10-14 15:27:29,880 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 15:50:05,871 WARNING Retrying (_CappedRetry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='intervals.icu', port=443): Read timed out. (read timeout=75)")': /api/v1/athlete/0/activities?oldest=2026-10-12&newest=2026-10-15&fields=id%2Cexternal_id%2Csource%2Cstart_date&limit=50
2026-10-14 15:57:29,900 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 16:25:08,017 WARNING Retrying (_CappedRetry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='intervals.icu', port=443): Read timed out. (read timeout=75)")': /api/v1/athlete/0/activities?oldest=2026-10-12&newest=2026-10-15&fields=id%2Cexternal_id%2Csource%2Cstart_date&limit=50
2026-10-14 16:27:30,088 INFO Full run: 0 activities seen, 0 enriched; wellness 0 days checked, 0 written; 0 Garmin requests
2026-10-14 16:52:18,939 WARNING Retrying (_CappedRetry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ReadTimeoutError("HTTPSConnectionPool(host='intervals.icu', port=443): Read timed out. (read timeout=75)")': /api/v1/athlete/0/activities?oldest=2026-10-12&newest=2026-10-15&fields=id%2Cexternal_id%2Csource%2Cstart_date&limit=50

ad After a restart

yeah I did enable autorestart just this part: “it starts by itself every time you log in” I just don’t get where I log in? to my macbook, to intervals or run the bridge page? sorry if I ask stupid questions but it is not that clear to me :wink:

ps. but overall everything works :wink:

1 Like

@Lukasz_Pludowski thanks for the log – that explains it, and nothing’s lost. You have swap mode on, so your two activities went different ways:

  • 24709271664: Intervals had marked its intervals as edited, so the bridge left Garmin’s copy in place (it never swaps those) and filled in the missing values instead – the “ENRICHED … PerformanceCondition, RecoveryTime …” line.
  • 24700926436: swapped – your original file went up as a new activity (i197103000), and the bridge then deleted Garmin’s filtered copy (i196580848).

The “blank” one was that deleted Garmin copy: the calendar still showed it until it reloaded, and with its file gone it had no data. Deleting it again changed nothing – the original with all its data stays.

Gmail: Google shows the app password in four groups of four. The next version takes it with or without the spaces; until then, type it without them.

“Log in” means your Mac: every time you log in to your MacBook, the bridge starts in the background on its own – nothing else to do. Not a stupid question at all; I’ll make that clearer in setup.

One question back, if you remember: had you changed anything on 24709271664 in Intervals before the bridge first saw it – split or merged intervals, edited laps? If so, that’s why the bridge left it alone: swap mode never replaces an activity whose intervals you edited, so your changes aren’t lost.